Digital Monitoring XR6 Manuel d'installation télécharger pdf (Page 10)

XR6/XR3 Installation Manual

Page x Issue 3.0 2009-07-15

Lightning hazards

Before opening the transmitter and touching internal parts, remove and solidly ground the antenna

connection.

RF hazards

A serious RF hazard and very high voltages exist in the vicinity of the antenna and its networks

during normal operations.

Toxic hazards

There are devices used in this equipment containing beryllium oxide ceramic, which is non-hazardous

during normal device operation and under normal device failure conditions. These devices are

specifically identified with “(BeO)” in the Description column of the Troubleshooting Manual’s parts

list(s).

Do not cut, crush or grind devices because the resulting dust may be hazardous if inhaled.

Unserviceable devices should be disposed of as harmful waste.

Other hazards

Ensure that appropriate fire alarms and fire extinguishers are available. Extinguishers must be suitable

for use on electrical fires.

Many other site safety risks exist. It is beyond the scope of this manual to identify all the risks and

procedures.

WARNING: It is not enough to ground the antenna terminal with the

antenna still connected. Even a small impedance in the ground strap

will result in lethal voltages during a lightning strike.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 97 98

Pas de commentaire

Digital Monitoring XR6 Manuel d'installation Page 10