Digital Monitoring XR6 Guide d'installation télécharger pdf (Page 21)

XR6/XR10 Installation Guide Digital Monitoring Products

COMPLIANCE

UL 1610 and 1076 SPECIFICATIONS

Central-Station and Proprietary Burglar-Alarm Units

17.1 Opening/Closing reports

The Opening/Closing Reports option must be programmed as YES. See the XR6/XR10 Programming Guide (LT-0230).

17.2 Automatic bell test

This option must be programmed as YES. See the XR6/XR10 Programming Guide (LT-0230).

17.3 Proprietary dialer

The Model XR6/XR10 provides Grade A proprietary service when configured as a digital dialer.

UL 1635 SPECIFICATIONS

Digital Burglar Alarm Communicator System Units

18.1 Digital Dialer telephone number

Both programmed telephone numbers must begin with a D or P. See the XR6/XR10 Programming Guide (LT-0230).

18.2 Entry delay

The maximum entry delay used must not be more than 60 seconds. See the XR6/XR10 Programming Guide (LT-0230).

18.3 Exit delay

The maximum exit delay used must not be more than 60 seconds. See the XR6/XR10 Programming Guide (LT-0230).

18.4 Test frequency

The Test Frequency option must be programmed so that the panel sends a report once every 24 hours. See the XR6/

XR10 Programming Guide (LT-0230).

18.5 Automatic bell test

This option must be programmed as YES. See the XR6/XR10 Programming Guide (LT-0230).

18.6 Grade B Central Station

Grade B Central Station service can be provided under UL 1635 by adding a Grade A local audible signal appliance and

placing the Model XR6/XR10 panel into the Model 350A Grade A Attack Resistant Housing.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26

Pas de commentaire

Digital Monitoring XR6 Guide d'installation Page 21